Calibration Equipment Standards

The standards we use to test your equipment are some of the best available.

Dimensional Calibration

Dimensional Calibration is performed using Pratt & Whitney’s Labmaster Universal Measuring System. This laser based system has unmatched accuracy for all types of precision dimensional measurement devices, 0-12 inch range with 2 micro inch accuracy.

Electrical Calibration

Fluke’s high precision multi-product workstation, the 5520A, is capable of calibrating frequency, capacitance and temperature. Within the frequency range of 0.01Hz- 2MHz, it has basic V dc accuracy of up to 0.0024 %.

The 8508A Reference Multimeter features 8.5 digit resolution, exceptional linearity and extraordinarily low noise and stability, producing what are arguably the most accurate measurements to be had from any commercially available product today.

Radio Frequency Calibration

The 9640A has signal precision and noise immunity throughout a 154dB dynamic range, down to –130 dBm, with a max output of +24, in the frequency range of 10Hz-4GHz.

Pressure Calibration

DHI 7601 is sensitive to 0.02PA + 0.5ppm, with a reproducibility of +/- 2ppm. It has an uncertainty of +/- 0.2PA + 12ppm.

Temperature Calibration

The Hart 9170A is the best performing industrial heat source to date in accuracy, stability, and uniformity. It has an immersion depth of 203mm. The entire range is –45 to 140°C with accuracy of +/- 0.1°C.